PTFE Product Range
Semi-finished and finished fluoropolymer components — standard sizes in stock, custom dimensions to drawing.
PTFE Sheet
Virgin and filled flat sheet for gaskets, linings, wear pads and electrical insulation.
| Specification | Value |
|---|---|
| Thickness | 0.5 – 50 mm |
| Standard Size | 1000 × 1000 / 1200 × 1200 / 1500 × 1500 mm |
| Density | 2.14 – 2.20 g/cm³ |
| Cutting | Die-cut or water-jet cut to drawing |
PTFE Rod
Molded and extruded rod stock for machining bushings, valve seats and insulators.
| Specification | Value |
|---|---|
| Diameter Range | 3 – 300 mm |
| Standard Length | 1000 / 2000 mm |
| Production | Extruded (small dia.) / Molded (large dia.) |
| Grade | Virgin / Filled |
PTFE Tube
Thin-wall and heavy-wall tubing, plus heat-shrink and spiral-cut options for lining and insulation.
| Specification | Value |
|---|---|
| Inner Diameter | 1 – 100 mm |
| Wall Thickness | 0.3 – 20 mm |
| Standard Length | 1000 / 2000 mm or coil |
| Type | Extruded / Heat-shrink / Spiral-cut |
PTFE Film & Tape
Skived film and adhesive-backed tape for release, insulation and sealing duties.
| Specification | Value |
|---|---|
| Thickness | 0.03 – 3.0 mm |
| Standard Width | 300 / 600 / 1000 mm |
| Surface | Plain / Sodium-etched (bondable) |
| Type | Skived film / Adhesive tape |
PTFE Gasket
Full-face and ring gaskets to ASME, DIN, JIS and EN flange standards, plus custom die-cut profiles.
| Specification | Value |
|---|---|
| Thickness | 0.5 – 10 mm |
| Size Range | DN15 – DN1200 |
| Standard | ASME / DIN / JIS / EN |
| Material | Virgin / Filled / ePTFE |
PTFE Seal Rings
V-rings, O-rings, lip seals and spring-energized seals, machined to close tolerances.
| Type | Application |
|---|---|
| V-Ring | Rotary shaft sealing, dust exclusion |
| O-Ring | Static sealing of flanges and fittings |
| Lip Seal | Hydraulic and pneumatic cylinders |
| Spring-Energized | High pressure, low temperature service |
Custom Machined Parts
Send us a drawing, 3D model or physical sample — we quote and produce the part in the appropriate PTFE grade.
| Capability | Detail |
|---|---|
| Processes | CNC turning, milling, drilling, threading |
| Tolerance | Typically ±0.05 mm (confirmed per part) |
| Input | 2D drawing / 3D model / physical sample |
| Quantity | Prototype to series production |
Need a Price for a Specific Item?
Tell us the product, size and quantity — best offer with lead time and packing details.
Request a Quote